| Identification | More | [Name]
Poly(3-hexylthiophene-2,5-diyl) | [CAS]
104934-50-1 | [Synonyms]
P3HT
POLY(3-HEXYLTHIOPHENE)
POLY(3-HEXYLTHIOPHENE-2,5-DIYL)
Poly(3-hexylthiophene-2,5-diyl), regiorandom
POLY(3-HEXYLTHIOPHENE-2,5-DIYL), REGIOREGULAR, ELECTRONIC GRADE, 99.995% METALS BASIS, AVERAGE MW~17500
POLY(3-HEXYLTHIOPHENE), REGIOREGULAR
Poly(3-hexylthiophene-2,5-diyl), regioregular, low metals
P3HT, Plexcore(R) OS 2100
P3HT, Plexcore(R) OS 1100 | [Molecular Formula]
(C10H18S)n | [MDL Number]
MFCD00217686 | [MOL File]
104934-50-1.mol | [Molecular Weight]
166.283 |
| Chemical Properties | Back Directory | [Melting point ]
238 °C
| [density ]
1.02 g/cm3 | [solubility ]
chloroform, methylene chloride, toluene and THF: soluble
| [form ]
Powder/Chunks | [color ]
red
| [semiconductor properties]
P-type (mobility=1E-4-1E-1cm2/V·s) | [Sensitive ]
Light Sensitive | [InChI]
InChI=1S/C12H20S/c1-4-5-6-7-8-12-9-10(2)13-11(12)3/h9H,4-8H2,1-3H3 | [InChIKey]
DUFPJSOXRHVDOV-UHFFFAOYSA-N | [SMILES]
S1C(C)=CC(CCCCCC)=C1C | [CAS DataBase Reference]
104934-50-1(CAS DataBase Reference) | [Description]
Regioregular poly(3-hexylthiophene-2,5-diyl), commonly known as P3HT, is a popular low band gap polymer donor with applications in organic photovoltaics, polymer solar cells, OLEDs and OFETs. We sell a full range of P3HT with different molecular weights and regioregularities for a variety of research purposes. Produced by Merck KGaA, this high quality P3HT collection allows a wide range of science and engineering to be undertaken. |
| Hazard Information | Back Directory | [Chemical Properties]
Green to brown to black solid | [Uses]
Poly(3-hexylthiophene-2,5-diyl) optimized for use in organic photovoltaic's (OPV) research and devices. It is also used in laboratories. | [Materials Uses]
P3HT (poly(3-hexylthiophene-2,5-diyl) is a p-type conductive polymer chain that is currently one of the most widely used materials in photovoltaics due to its interesting electronic properties. |
| Safety Data | Back Directory | [Hazard Codes ]
Xi | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36:Wear suitable protective clothing . | [WGK Germany ]
3
| [HS Code ]
29309090 |
| Questions And Answer | Back Directory | [Datasheet]
Regioregular poly(3-hexylthiophene-2,5-diyl). Commonly known as P3HT.
The highest regioregularity P3HT (M104, RR = 96.3%) produces highly crystalline films and is recommended for OFETs, nanofibril formation and fast drying OPVs at the thin interference peak (90 nm). However, the exceptionally high regioregularity of this P3HT means that gelling and surface roughness can be an issue for slow-drying thick-film OPVs (>200 nm). Lower molecular weight and regioregularity P3HT is recommended for inkjet and other large area or slow drying deposition techniques where gelling/aggregation and surface roughness need to be avoided.
A fabrication report with mobility measurements of 0.12 cm2/Vs for M104 can be found below.
All the P3HT below is highly soluble (50 mg/ml) in chlorinated solvents such as chloroform, chlorobenzene, dichlorobenzene and trichlorobenzene. The intermediate and lower molecular weight P3HT materials are recommended for use with non-chlorinated solvents such as xylene, toluene and THF due to their increased solubility.
|
|
|