產品牌號：SPchem ADB 30

Product Name：SPchem ADB 30

化學名：己二酸二[2-[2-(2-丁氧乙氧)乙氧]乙基酯

Chemical Name：bis[2-[2-(2-butoxyethoxy)ethoxy]ethyl] adipate

同類牌號：Nycofiex ADB 30 Synonym：Nycofiex ADB 30

?SPchem ADB 30是高分子量的醚/酯單體結構增塑劑，其化學特性使之與極性聚合物（如AEM，NBR，HNBRACM，PUR）有著良好的相容性。

?SPchem ADB 30 is high molecular weight and ether/ester monomeric plasticizer, and its chemical properties contribute a good compatibility with polar elastomers (eg. AEM, NBR, HNBR, ACM, PUR, etc.).

?低溫應用增塑劑，使膠料即使在150℃以上高溫老化后仍具有良好的低溫柔韌性和良好的持久性。具有低揮發(fā)性，低遷移,低模具污染以及易脫模性，在高溫下低蒸汽壓。

?Good low temperature flexibility and good permanency, even after aging at high temperature ( 150℃ and above); it is the best plasticizer in balancing high and low temperature endurance so far ; low volatlity , low migration , low mouldfouling, low mould release, low vapor pressure at high temperature.

?用于聚氨酯時可有效提高其粘度和柔韌性，亦可改善橡膠制品的熱老化性，易分散且對膠料的物理性能僅有略wei影響。

?Used in polyurethane to improve viscosity , flexibility; beneficial effect on the heat aging of rubber products, easily dispersible and changes the physical properties of rubber compounds only slightly.

?可替代DOP，DBP，DOA，DOS，且無致癌物，安全環(huán)保。

?It can replace DOP, DBP, DOA, DOS, and carcinogens-free, environmental-friendly.

?主要用于汽車發(fā)動機機艙內的橡膠零部件、燃油管、汽車安全帶、注塑件、剎車片、行李箱、電線護套、工業(yè)軟管、傳動密封件、墊圈、密封墊圈、以及多種模壓和注射制品中。

?It is mainly used for rubber parts in car engine cabin, fuel pipe, car safe belt, car injection part, brake part, suitcase, cable sheathing, industry hose, transmission sealing, gasket, sealing gasket, and various moulding and injection products.